Produktbeskrivelse
|
Moxa ICF-1150-S-SC-T-IEX - fibermedieomformer - RS-232, RS-485, RS-442
|
Enhedstype
|
Fibermedieomformer - Terminalblok (klemme) / SC enkelttilstand
|
Model
|
Monterbar på DIN rail
|
Dataoverførselshastighed
|
921.6 Kbps
|
Optisk bølgelængde
|
1310 nm
|
Dataforbindelsesprotokol
|
RS-232, RS-485, RS-442
|
Maks. overføringsafstand
|
40 km
|
Effekt
|
DC 12 - 48 V
|
Dimensioner (B x D x H)
|
3.03 cm x 7 cm x 11.5 cm
|
Vægt
|
330 g
|
Producentgaranti
|
5 års garanti
|
Produktdatablad |
|
Enhedstype |
Fibermedieomformer |
Model |
Monterbar på DIN rail |
Forbindelsesteknologi |
Kabling |
Dataforbindelsesprotokol |
RS-232, RS-485, RS-442 |
Dataoverførselshastighed |
921.6 Kbps |
Optisk bølgelængde |
1310 nm |
Maks. overføringsafstand |
40 km |
Statusindikatorer |
Strøm, link/aktivitet |
Egenskaber |
Halv dupleksmodus, fuld dupleksmodus, 15 KV Electrostatic Discharge Protection |
Interface |
1 x RS-232/422/485 - terminalblok ¦ 1 x netværk - SC single-mode x 2 |
MTBF (forventet tid mellem fejl) |
792,085 timer |
Overensstemmelsesstandarder |
UL, cUL, EN55022 Class B, FCC Part 15 B, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, RoHS, EN 61000-4-8, WEEE, IEC 60068-2-32, UL 508, ATEX Directive, IECEx, IP30, China RoHS |
Nødvendig spænding |
DC 12 - 48 V |
Bredde |
3.03 cm |
Dybde |
7 cm |
Højde |
11.5 cm |
Vægt |
330 g |
Service & Support |
Begrænset garanti - 5 år |
Min. driftstemperatur |
-40 °C |
Maks. driftstemperatur |
85 °C |
Fugtighedsgrad ved brug |
5 - 95 % (ikke-kondenserende) |
The ICF-1150 series support 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS-485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data out through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer's serial port to the RS-485 bus.