Glemt adgangskode?
Opret konto

TP-LINK MC112CS fibermedieomformer - Ethernet, Fast Ethernet

Producent TP-LINK
Produkt nr. MC112CS
EAN 6935364030421
Varenummer 288279
440,- DKK
  0 stk. København
  0 stk. Aarhus
+5 stk. Fjernlager
Leveringstid 1-3 dage
Mere info
Produktbeskrivelse TP-LINK MC112CS - fibermedieomformer - Ethernet, Fast Ethernet
Enhedstype Fibermedieomformer - RJ-45 / SC enkelttilstand
Model Ekstern
Kabeltype 10Base-T, 100Base-FX, 100Base-TX
Dataoverførselshastighed 100 Mbps
Optisk bølgelængde 1310 (TX) / 1550 (RX) nm
Dataforbindelsesprotokol Ethernet, Fast Ethernet
Maks. overføringsafstand 20 km
Dimensioner (B x D x H) 9.5 cm x 7.3 cm x 2.7 cm
Enhedstype Fibermedieomformer
Model Ekstern
Forbindelsesteknologi Kabling
Kabeltype 10Base-T, 100Base-FX, 100Base-TX
Dataforbindelsesprotokol Ethernet, Fast Ethernet
Dataoverførselshastighed 100 Mbps
Optisk bølgelængde 1310 (TX) / 1550 (RX) nm
Maks. overføringsafstand 20 km
Statusindikatorer Kollisionsstatus, dupleksmodus for port, strøm, link/aktivitet
Egenskaber Datatransport, auto-negotiation, auto-uplink (auto MDI/MDI-X), halv dupleksmodus, fuld dupleksmodus
Overensstemmelsesstandarder IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Interface 1 x Ethernet 10Base-T/100Base-TX - RJ-45 hun ¦ 1 x Ethernet 100Base-FX - SC single-mode
Overensstemmelsesstandarder FCC
Strømenhed Ekstern strømforsyning
Bredde 9.5 cm
Dybde 7.3 cm
Højde 2.7 cm
Min. driftstemperatur 0 °C
Maks. driftstemperatur 40 °C
Fugtighedsgrad ved brug 10 - 90%

The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data. So the other end device to cooperate with the MC112CS should work at 1550nm on transferring data and at 1310nm on receiving data. Another TP-LINK's media converter MC111CS is just one of the examples to cooperate with MC112CS.
Other features of this module include the ability to be used as a stand alone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC112CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.