Produkt nr.: 100454
With its built in hot-shoe, ControlTL firmware and transceiver function, the FlexTT5 is the perfect addition to Nikon CLS/i-TTL flash system and takes the Nikon CLS system beyond the boundaries of infrared technology. The FlexTT5 is also the perfect transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions. The FlexTT5's simple design comes to life through its hot-shoe connection with a camera or flash.
On camera, the FlexTT5 works identically to the MiniTT1 with the convenience of AA batteries. The system tracks your changes in ISO and aperture and reacts accordingly to make sure exposures stay right on target. Use the exposure compensation dial on your camera to remotely adjust your flash output. Mount a flash or command unit on the FlexTT5 to use the same zone controls as you would normally. Slip in the AC3 ZoneController for Nikon and use its simple interface to control three zones of lights.
With PocketWizard's HyperSync technology, the FlexTT5 allows you to use sync speeds beyond your camera's x-sync, up to 1/8000th of a second with some camera/strobe combindations, giving you the control you've always been looking for.
You can also use your camera's high speed sync/FP mode with Nikon Speedligths with the convenience and freedom of radio reliability. Use any shutter speed or f-stop you want no matter where you place your flash.
Under a remote flash, the FlexTT5 is your seamless connection to remote power control. Place your flashes where you want to; hide them or use them in bright daylight.
Use the FlexTT5's camera sync port to trigger a remote camera. Use the flash port to trigger any manual flash. The FlexTT5 also has the Auto-Sensing Transceiver technology that enables it to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode.