Produktbeskrivelse
|
PowerWalker VFI 30K CPG 3/3 BI - UPS - 27000 Watt - 30000 VA
|
Enhedstype
|
UPS - ekstern
|
Vægt
|
205 kg
|
Indgangskabler
|
Tre faser
|
Indgangspænding
|
AC 190 - 520/305 - 478 V
|
Udgangspænding
|
AC 208/220/230/240/400 V ± 1%
|
Strømkapacitet
|
27000 Watt / 30000 VA
|
Input-stik
|
1 x terminalblok
|
Output-stikforbindelser
|
1 x terminalblok
|
Batteri
|
- 7 At
|
Antal batterier
|
2 batteri strenge
|
Netværk
|
RS-232, USB
|
Dimensioner (B x D x H)
|
30 cm x 81.5 cm x 100 cm
|
Produktdatablad |
|
Enhedstype |
UPS - ekstern |
UPS-teknologi |
On-line |
Indgangspænding |
AC 190 - 520/305 - 478 V |
Indgangspændingsområde |
AC 190 - 520 V |
Med frekvens |
46 - 54 / 56 - 64 Hz ± 0.1Hz |
Indgangskabler |
Tre faser |
Nødvendig frekvens |
46 - 54 / 56 - 64 Hz |
Input-stik |
1 x terminalblok |
Detaljer om strømudgangskonnektorer |
1 x terminalblok |
Udgangspænding |
AC 208/220/230/240/400 V ± 1% - 46 - 54 / 56 - 64 Hz |
Strømkapacitet |
27000 Watt / 30000 VA |
Bølgeform udgang |
Sinewave |
Effektivitet |
95% at 100% Load, 92% Battery mode |
Strømfaktor (PF) |
0.99 |
Total harmonisk forvrængning (THD) |
6 % |
Antal |
2 batteri strenge |
Forsynet spænding |
12 V |
Kapacitet |
7 At |
Genopladningstid |
9 timer |
Grænseflade til fjernstyring |
RS-232, USB |
Interface |
1 x administration (USB) - 4 pin USB Type B ¦ 1 x administration (RS-232) - 9-pin D-Sub (DB-9) ¦ 1 x EPO (emergency power off) |
Ekspansionsåbninger |
1 (total) / 1 (fri) x Ekspansionsholder |
Egenskaber |
4 hjul, LCD-skærm, overbelastningsbeskyttelse |
Overensstemmelsesstandarder |
VFI-SS-111 |
Med software |
ViewPower |
Min. driftstemperatur |
0 °C |
Maks. driftstemperatur |
40 °C |
Fugtighedsgrad ved brug |
0 - 95% (ikke-kondenserende) |
Lydudbredelse |
75 dB |
Bredde |
30 cm |
Dybde |
81.5 cm |
Højde |
100 cm |
Vægt |
205 kg |
The PowerWalker VFI CPG 3/3 series is a professional commercial solution built in double conversion technology with power factor 0.9. Equipped with three-level inverter topology, it results in high efficiency reaching 95% in Line Mode and even 98% in ECO Mode. The series ensures low harmonic distortions and precise voltage regulation (1%). All phases have Active Power Factor Correction.
Thanks to its modern design, the VFI CPG series reaches a very high power density (kVA output in relation to the size/volume of the unit). All models of this series offer generator support, communication ports for SNMP, USB and RS-232 and allow parallel operation up to three units.
For this model battery numbers can be adjusted (between 32 and 40pcs), allowing more flexibility and compatibility with existing battery banks. The three stage extendable charging design also enhances battery performance over its life time. For safety reasons this series has been equipped with backfeed protection (reverse feed) in order to avoid power transfer to the input terminal in case of mains failure.