Glemt adgangskode?
Opret konto

TP-LINK MC111CS fibermedieomformer - Ethernet, Fast Ethernet

Producent TP-LINK
Produkt nr. MC111CS
EAN 6935364030414
Varenummer 298907
459,- DKK
Lagerstatus:
  0 stk. København
  0 stk. Aarhus
+5 stk. Fjernlager
Leveringstid 1-3 dage
Mere info
Produktbeskrivelse TP-LINK MC111CS - fibermedieomformer - Ethernet, Fast Ethernet
Enhedstype Fibermedieomformer - RJ-45 / SC enkelttilstand
Model Ekstern
Kabeltype 10Base-T, 100Base-FX, 100Base-TX
Dataoverførselshastighed 100 Mbps
Optisk bølgelængde 1550 (TX) / 1310 (RX) nm
Dataforbindelsesprotokol Ethernet, Fast Ethernet
Maks. overføringsafstand 20 km
Dimensioner (B x D x H) 9.5 cm x 7.3 cm x 2.7 cm
Enhedstype Fibermedieomformer
Model Ekstern
Forbindelsesteknologi Kabling
Kabeltype 10Base-T, 100Base-FX, 100Base-TX
Dataforbindelsesprotokol Ethernet, Fast Ethernet
Dataoverførselshastighed 100 Mbps
Optisk bølgelængde 1550 (TX) / 1310 (RX) nm
Maks. overføringsafstand 20 km
Statusindikatorer Tilslutningsaktivitet, kollisionsstatus, dupleksmodus for port, strøm
Egenskaber Datatransport, auto-negotiation, auto-uplink (auto MDI/MDI-X), halv dupleksmodus, fuld dupleksmodus
Overensstemmelsesstandarder IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Interface 1 x Ethernet 10Base-T/100Base-TX - RJ-45 hun ¦ 1 x Ethernet 100Base-FX - SC single-mode
Overensstemmelsesstandarder FCC
Strømenhed Ekstern strømforsyning
Bredde 9.5 cm
Dybde 7.3 cm
Højde 2.7 cm
Min. driftstemperatur 0 °C
Maks. driftstemperatur 40 °C
Fugtighedsgrad ved brug 10 - 90%

The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK's 19" system chassis, Auto MDI/MDI-X for TX port, auto negotiation of duplex mode on TX port, and front panel status LEDs. The MC111CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.

Finansiering
Læs vilkår
Løbetid
Pr. måned KUN
ÅOP 9000.1%
Låneomkostninger
Finansiering vælges som betalings metode når du gennemfører din bestilling. Papirløs godkendelse med NemID.