| Produktbeskrivelse
|
Moxa IEX-402-VDSL2 - kortdistance-modem - 10Mb LAN, 100Mb LAN, Modbus
|
| Enhedstype
|
Kortdistance-modem - RJ-11 / RJ-45
|
| Model
|
Monterbar på DIN rail
|
| Kabeltype
|
10Base-T, 100Base-TX
|
| Dataforbindelsesprotokol
|
10Mb LAN, 100Mb LAN, Modbus
|
| Protokol til fjernadministration
|
SNMP 1, Telnet, SNMP 3, SNMP 2c, HTTP
|
| Maks. overføringsafstand
|
3 km
|
| Effekt
|
DC 12/24/48 V
|
| Dimensioner (B x D x H)
|
3.5 cm x 10.5 cm x 13 cm
|
| Vægt
|
275 g
|
| Producentgaranti
|
5 års garanti
|
Produktdatablad |
|
| Enhedstype |
Kortdistance-modem |
| Model |
Monterbar på DIN rail |
| Forbindelsesteknologi |
Kabling |
| Kabeltype |
10Base-T, 100Base-TX |
| Dataforbindelsesprotokol |
10Mb LAN, 100Mb LAN, Modbus |
| MAC adresse table størrelse |
1 K indtastningshukommelse |
| Protokol til fjernadministration |
SNMP 1, Telnet, SNMP 3, SNMP 2c, HTTP |
| Maks. overføringsafstand |
3 km |
| Statusindikatorer |
Strøm, 100M udstyr tilsluttet, mislykket, status, link/aktivitet |
| Egenskaber |
Datatransport, auto-negotiation, auto-uplink (auto MDI/MDI-X), halv dupleksmodus, fuld dupleksmodus, Link Fault Pass Through funktion(LFP), indbygget DIP switch |
| Overensstemmelsesstandarder |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3p |
| Interface |
1 x Ethernet 10Base-T/100Base-TX - RJ-45 hun ¦ 1 x VDSL2 - RJ-11 hun ¦ 1 x konsol - RJ-45 |
| Medfølgende ledninger |
1 x konsolkabel |
| MTBF (forventet tid mellem fejl) |
1,490,000 timer |
| Overensstemmelsesstandarder |
EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-8, FCC Part 15 B Class A, IP30, EN 55022 Class A |
| Nødvendig spænding |
DC 12/24/48 V |
| Bredde |
3.5 cm |
| Dybde |
10.5 cm |
| Højde |
13 cm |
| Vægt |
275 g |
| Service & Support |
Begrænset garanti - 5 år |
| Min. driftstemperatur |
-10 °C |
| Maks. driftstemperatur |
60 °C |
| Fugtighedsgrad ved brug |
5 - 95 % (ikke-kondenserende) |
The IEX-402 series is an industrial managed Ethernet extender designed with one 10/100BaseT(X) and one DSL port. The Ethernet extender provides a point-to-point extension over twisted copper wires based on G.SHDSL.bis and VDSL2 standards. The IEX-402-SHDSL supports data rates of up to 15.3 Mbps with a long transmission distance of up to 8 km, while the IEX-402-VDSL2 provides data rates of up to 100 Mbps with transmission distance of up to 3 km.
The IEX-402 series is designed for use in harsh operating environments. The DIN-rail mount, wide operating temperature range (-40 to 75°C), and dual power input make it ideal for installation in industrial applications.
To simplify configuration, the IEX-402 series uses CO/CPE auto negotiation. By factory default, the device will automatically assign CPE status to one of each pair of IEX devices. In addition, Link Fault Pass-through (LFP) and network redundancy interoperability enhance the reliability and accessibility of communication networks. Advanced managed and monitored functionality through MXview, including a virtual panel, improve the user experience for quick trouble shooting.
