TITAN USB-COMI-M - seriel adapter
Produktbeskrivelse | TITAN USB-COMI-M - seriel adapter |
Enhedstype | Seriel adapter |
Model | Monterbar på DIN rail |
Grænseflade (bus) type | USB |
Dataforbindelsesprotokol | RS-232, RS-422, RS-485 |
Dataoverførselshastighed | 921.6 Kbps |
Overensstemmelsesstandarder | USB 1.1, USB 2.0 |
Systemkrav | Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows 7, Microsoft Windows Vista, Linux Kernel 2.4 eller nyere, Microsoft Windows 2003 |
Produktdatablad |
|
Enhedstype | Seriel adapter |
Model | Monterbar på DIN rail |
Grænseflade (bus) type | USB |
Forbindelsesteknologi | Kabling |
Dataforbindelsesprotokol | RS-232, RS-422, RS-485 |
Dataoverførselshastighed | 921.6 Kbps |
Statusindikatorer | Strøm, send, modtag |
Egenskaber | Software flowkontrol, hardware flowkontrol, halv dupleksmodus, fuld dupleksmodus, strøm fra USB, 10 KV Electrostatic Discharge Protection |
Overensstemmelsesstandarder | USB 1.1, USB 2.0 |
Interface | 1 x RS-232/422/485 - 9-pin D-Sub (DB-9) ¦ 1 x RS-232/422/485 - Terminalblok (skrueklemmer) |
Tilslutninger | 1 x USB |
Overensstemmelsesstandarder | Plug and Play, EN 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN55024, CISPR 22, EN55022 Class B, FCC Part 15 B |
OS nødvendig | Microsoft Windows 2000, Microsoft Windows XP, Microsoft Windows 7, Microsoft Windows Vista, Linux Kernel 2.4 eller nyere, Microsoft Windows 2003 |
Min. driftstemperatur | 0 °C |
Maks. driftstemperatur | 55 °C |
Fugtighedsgrad ved brug | 5 - 95% |
- Adds one RS-232, RS-422 or RS-485 serial port by connecting to a USB port
- One DB9 male connector and one 6-pin terminal block for optimal flexibility of serial connection
- Supplies power output of 5V, 150mA through pin-5 of terminal block
- No need to open chassis to set operation modes-one external DIP switch for easy RS-232, RS-422, RS-485 mode settings
- Installed as standard windows COM port
- SECC metal chassis with DIN rail bracket
- Full RS-232 modem control signals and hardware/software flow control
- Automatic transmit and receive control for 2-wire RS-485 half-duplex mode
- Built-in termination and biasing
- High speed serial port with the baud rate up to 921.6K bps
- Non-standard baud rates supported
- LEDs of power, TxD and RxD for easy port monitoring and diagnostics
- Serial port protected with surge protection of 10 KV
- Powered by USB port, no external power adapter required
- Easy Plug and Play installation and RS-232/RS-422/RS-485 device connection
- COM port number assigned can be changed to any COM port number required
- Works with USB 1.1 and 2.0 host port