Glemt adgangskode?
Opret konto

Lian Li PC-Q07 minitower - mini ITX

Producent Lian Li
Produkt nr. PC-Q07B
EAN 4718466990990
Varenummer 201874
Lagerstatus:
  0 stk. København
  0 stk. Aarhus
  0 stk. Fjernlager
Forventet levering ved bestilling: 01-09-2017
Mere info
638,- DKK
Produktbeskrivelse Lian Li PC-Q07 - minitower - mini ITX
Produkttype Systemkabinet
Model Minitower
Farve Sort
I/O-kontakter 2 x USB 2.0
Understøttede motherboards Mini-ITX
Egenskaber, systemkabinet Vibrationsabsorberende drevholder, lavet af aluminium
Strømenhed Ingen strømforsyning
Specifikationsoverensstemmelse ATX / PS/2
Dimensioner (B x D x H) 19.3 cm x 20.8 cm x 28 cm
Vægt 1.1 kg
Model Minitower
Max størrelse på bundkort Mini ITX
Understøttede motherboards Mini-ITX
Specifikationsoverensstemmelse ATX / PS/2
Antal interne bays 2
Antal bays med frontadgang 1
Farve Sort
Egenskaber, systemkabinet Vibrationsabsorberende drevholder, lavet af aluminium
Udvidelses-båse 1 (total) / 1 (fri) x frontadgang - 5.25" ¦ 1 (total) / 1 (fri) x intern - 3.5" ¦ 1 (total) / 1 (fri) x intern - 2.5"
Ekspansionsåbninger 1 x Ekspansionsholder
Interface 2 x USB 2.0
Strømenhed Ingen strømforsyning
Bredde 19.3 cm
Dybde 20.8 cm
Højde 28 cm
Vægt 1.1 kg

A good design is to make the life simpler, not complicate it. The Mini-Q PC-Q07 is in minimalism style, it is a combination of art and technology.
The clean shape of Mini-Q PC-Q7 with rounded edge can be fit with interior decoration easily. The hair-lined anodized aluminum exterior dresses up with blue and red back-lighted power and reset buttons. The design of Mini-Q PC-Q07 is to be as simple as possible, the exterior of the case is also the structure of the chassis.
The chassis is made of 1.5mm aluminum alloy panel, The thick and solid chassis has no vibration problem. To reduce the size of the Mini-Q PC-Q07, the side panel is secured with screws, it also reduces the vibration, and lowers the noise level. The 3.5" hard drive mounted with tool-less thumb screw with shock-absorption rubber ring, to reduce the noise.
The Mini-Q PC-Q07 has passive cooling design, due to there are less heat from the Mini-ITX system. There are vent holes at the bottom part of the side panels and chassis, allow air to enter to cool the system down. There are also some vent holes next the rear I/O slots, designed for CPU cooling. There are room for CPU cooler within 70mm height. The vent holes on the top of the chassis were for the release the hot air, and it complete the air circulation.