Glemt adgangskode?
Opret konto

ATEN IC485S seriel adapter

Producent Aten
Produkt nr. IC485SN-AT
Varenummer 421531
Lagerstatus:
  0 stk. København
  0 stk. Aarhus
  0 stk. Fjernlager
Forventet levering ved bestilling: 15-08-2017
Mere info
665,- DKK
Produktbeskrivelse ATEN IC485S - seriel adapter
Enhedstype Seriel adapter
Model Ekstern
Grænseflade (bus) type Seriel RS-232
Porte RS-422/485
Dimensioner (B x D x H) 5.6 cm x 2.1 cm x 8.1 cm
Kabeltype Seriel
Dataforbindelsesprotokol RS-422, RS-485
Dataoverførselshastighed 115.2 Kbps
Enhedstype Seriel adapter
Model Ekstern
Grænseflade (bus) type Seriel RS-232
Porte RS-422/485
Forbindelsesteknologi Kabling
Kabeltype Seriel
Dataforbindelsesprotokol RS-422, RS-485
Dataoverførselshastighed 115.2 Kbps
Interface 1 x RS-422/485 - terminalblok x 4
Tilslutninger 1 x seriel - RS-232 - 25-pin D-Sub (DB-25)
Bredde 5.6 cm
Dybde 2.1 cm
Højde 8.1 cm

The IC485S is a hardware solution to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively. The converter can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. The IC485S is a bi-directional interface converter for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations. The IC485S also provides an extra Monitoring function. Two slide switches are used to configure its operation mode, contention control, and assignment of the RS-232.